Just 3 wraps
for leak-proof joints!

Applications: Ideally suited for natural gas, propane and butane lines. Use on pipe made from galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, polypropylene, PVC, CPVC, ABS and fiberglass. Do not use Gas Thread Seal Tape on oxygen systems.

Specification MX62:
Certified to comply with the provisions of A-A58092 (ASG), UL-listed 31RO, Australian Gas Association AGA 3226.
Composition: 99.0% PTFE <1.0% Pigment
Color: Yellow
Thickness: 0.004” +/-10% (0.102mm +/-10%
Density: 1.5g/cm3 +/-10%
Elongation: >100%
Pressure rating: In tests conducted by an independent laboratory Mill-Rose
3-Wrap Yellow Gas Seal Tape was found to seal fittings carrying natural gas at pressures up to 4,347 PSI or 30,000kPa when applied as per instructions. (Details available upon application.) Note: Pressure ratings are relative to the quality and torque of the fittings and the amount of tape used.
Temperature range: -400°F to +500°F (-268°C to + 260°C) PTFE is completely stable up to +500°F or +260°C. Decomposition is slow up to 750°F or 400°C. Although decomposition will occur on contact with naked flames.
Tensile strength: 10-17 N/mm2