3-Wrap Yellow Gas PTFE Thread Seal Tape
TAKE 5% OFF
All Thread Tapes & Sealants
- Mill-Rose 3-Wrap Yellow Gas Seal Tape is a PTFE thread sealing tape designed specifically for gas lines. This is a full or maximum-density thread sealing tape.
- Mill-Rose 3-wrap yellow gas seal tape is approved by relevant authorities and used by the gas industry world-wide. It’s color-coded yellow so fitters and inspectors can easily recognize it as an approved tape.
- Applications: Ideally suited for natural gas, propane and butane lines. Use on pipe made from galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, polypropylene, PVC, CPVC, ABS and fiberglass. Do not use Gas Thread Seal Tape on oxygen systems.
- Specification MX62:
Certified to comply with the provisions of A-A58092 (ASG), UL-listed 31RO, Australian Gas Association AGA 3226.
Composition: 99.0% PTFE <1.0% Pigment
Thickness: 0.004” +/-10% (0.102mm +/-10%
Density: 1.5g/cm3 +/-10%
Pressure rating: In tests conducted by an independent laboratory Mill-Rose
3-Wrap Yellow Gas Seal Tape was found to seal fittings carrying natural gas at pressures up to 4,347 PSI or 30,000kPa when applied as per instructions. (Details available upon application.) Note: Pressure ratings are relative to the quality and torque of the fittings and the amount of tape used.
Temperature range: -400 Degree F to +500 Degree F (-268 Degree C to + 260 Degree C)
PTFE is completely stable up to +500Degree F or +260Degree C.
Decomposition is slow up to 750 Degree F or 400 Degree C. Although decomposition will occur on contact with naked flames.
Tensile strength: 10-17 N/mm2