DISCONTINUED: 1.5 in. Tri-Clamp Cap with 1 in. Cut Out - 304 Stainless Steel Fitting - Home Brew Hardware

• These TC Caps have been custom made with threads and cut outs so you can convert your current line to a smaller one.
• You can also weld a TC150-Cap-1.5"-CO to any 1.5" tube to attached a Tri-Clamp ferrule end and the same applies to the TC200-Cap-2"-CO and a 2" line.
• The Caps with the NPT threaded ends allow you to change any 1/2" or 3/4" threaded fitting into a 1.5" Tri-Clamp.
• Using a TC150-Cap-1/2"NPT with convert a Thermometor to a TC end.

Compatible with all tri-clamp and tri-clover fittings. Caps are usually placed over the open end of valves or tri clamp compatible piping in order to keep it sanitary. This cap has a 1/2" or 1" hole in the center that offer a blank slate onto which another sanitary fitting can be welded. These cutouts can be helpful when transitioning from Tri-Clamp to welded fitting. Tri clover caps can also be drilled and welded to make other fittings. Having several extra tri clover caps around is always a good idea. Tri-Clamp end caps are manufactured from 304 food grade stainless steel.