1/2 in. Universal Weldless Bulkhead 304 Stainless Steel Brewers Hardware
(No reviews yet)
Write a Review
- SKU:
- BFBH050-PLAIN
- MPN:
- BH050-PLAIN
- Weight:
- 1.00 LBS
Frequently bought together:
Description
- 1/2" Weldless Bulkhead fittings for home brewing makes it simple to attach a stainless steel ball valve or Brew thermometer to your Brew Kettle or Mash Tun. Also Known as Weldless Bulkheads for Home brewing\
- 1/2" Universal Weldless Bulkhead Fitting, Stainless Steel. You have the Freedom to add any 1/2" homebrew Fitting.
- 1/2" Male NPT Nipple on the exterior side and 1/2" Female NPT for the interior, as well as 3/4" Male NPT on the interior.
- Comes complete with a flat washer and thick rubber washer to ensure easy installation.
Additional Information
Size (inches): |
.500 (1/2") |
Category: |
Brew Hardware |
Product Type: |
Universal Weldless Bulkhead Fitting |
Material Type: |
304 Stainless Steel |
End Connection: |
NPT |
Related Products
1/2 in. Weldless Bulkhead Fitting x 1/2 in. 90 Degree Elbow 304 Stainless Steel Brewers Hardware
$11.58
Type a description for this product here...
BFBH050EL
1/2 in. Weldless Bulkhead Fitting x 1/2 in. Coupling 304 Stainless Steel Brewers Hardware
$11.81
Weldless Bulkhead fittings for home brewing makes it simple to attach a stainless steel ball valve or Brew thermometer to your Brew Kettle or Mash Tun. BH050-CP - Weldless Bulkhead Fitting by...
BFBH050CP
1/2 in. Tri-Clamp Ferrule, Medium (0.846 in. OAL) 304 Stainless Steel Sanitary TriClover Fittings & Brewers Hardware
$4.55
How to Make & Size a Tri-Clamp Connection A standard Tri-Clover Ferrule widely used in breweries and has become popular in Home Brew. 1/2" and 3/4" Tri-Clamp Ferrule share the same size as...
BFOTC075050-F
1/2 in. x 1/4 in. Hex Reducing Bushing, 304 Stainless Steel Brewers Hardware
$2.15
Reducing Bushings 3/4" and below. Focusing on the 1/2" reducers for Home Brew. Stainless Steel Reducing Bushing, FNPT (Larger Thread) by MNPT (Smaller Thread)
BU050025304
1/2 in. Lock Nut, NPS Straight Thread with Gasket Groove, 304 Stainless Steel Brewers Hardware
$3.45
A variety of Stainless Steel Lock Nuts ranging from 1/4" up to 1". These Lock nuts have Straight Thread, ( NPS Thread), so they will thread the whole way on NPS threaded nipples. The 1/2" is the...
BFOLN050SSNPSG
