Take 10% off orders over $245 use code BFO245 FREE Shipping Over $99 on Ground Orders Earn Rewards

Green Full-Density Oxygen Thread Seal Tapes

Green Full-Density Oxygen Thread Seal Tapes

Green Full-Density Oxygen Thread Seal Tapes Green Full-Density Oxygen Thread Seal Tapes


Applications, Specifications and Install Information

  • Mill-Rose Full-Density Green Thread Seal Tape is over five times heavier than common sealing tapes so you can use it and never worry about contaminating systems.
  • Because it is degreased; it has no residual lubricant, unlike common tapes made with petroleum as a lubricant. Specifically developed for oxygen installations, Green thread seal tape is both safe and reliable to use; it is chemically inert and wont support combustion.
  • Applications: Oxygen lines, systems and other flammable environments. Also may be used on most liquid, oil and chemical installations.
  • Specification MX65: Oxygen sealant tape is a degreased version of Gas Seal Tape. Meets or exceeds A-A58092 standards (ASG) and has the approval of most gas companies: AIRCO (USA), British Oxygen Co. (UK), CANOX (Canada), and Commonwealth Ind. Gases (Aus.).

    Specifications:
    Composition: 99.6% PTFE <0.4% pigment
    Color: Green
    Length: 260" (6.6m)
    Width: 1/2" (12mm), 3/4" (19mm) and 1" (25mm)
    Thickness: 0.102mm +/-10%
    Density: 1.5g/cm3 +/-10%
    Elongation: >100%
    Pressure rating: Mill-Rose Green Oxygen Tape has been used regularly on oxygen fittings at pressures up to 2,173.9PSI or 15,000kPa Note: Pressure ratings are relative to the quality and torque of the fittings and the amount of tape used.
    Temperature range: -450 Degree F to +500 Degree F (-268 Degree C to +260 Degree C) PTFE is completely stable up to +500 Degree F or +260 Degree C.
    Decomposition is slow up to 750 Degree F or +400 Degree C. Although decomposition will occur on contact with naked flames.
    Tensile strength: 9-13N/mm2