Ferrules
Bevel Seat Ferrules - 3-A Sanitary Certified Stainless Steel Fittings
Bevel Seat Stainless Steel Sanitary Fittings are used on process equipment and piping to ensure rigidity. Bevel seat unions are made of a threaded bevel ferrule joined with a plain bevel ferrule. Both the threaded bevel ferrule and the plain bevel ferrule are available in either 304 or 316L alloy. The ferrules are joined by 304 hex-nuts. Gaskets are not required for positive shut-off of Bevel Seat Unions, but can be purchased on request. Our bevel seat fittings meet all 3A requirements. On most items, other finishes and configurations are available on request.
- Available in 304 and 316L
- Surface Finish: 32Ra
- Polished 150 grit outside (OD) 180 grit inside (ID)
- 3-A Sanitary Certified
- Wall Thickness:
1" through 3" = 0.065”
4" = 0.083”
-
Short Plain Bevel Seat Weld Ferrules (14PRF)
-
Long Plain Bevel Seat Ferrules (14A)
-
Short Threaded Bevel Seat Ferrules (15TRF)
-
Long Threaded Bevel Seat Ferrules (15A)
-
14W Plain Ferrule Heavy Tank Spud
-
14WL Plain Ferrule Light Tank Spud
-
15R Threaded Recessless Ferrules
-
15WL Threaded Ferrule Light Tank Spud